24K Pure Gold Solution - Immersion Plating

Description

24k Pure Gold Bath Solution
is an extremely efficient, neutral pH, water-clear gold plating solution designed to produce a gold electro-deposit of 99.9+% purity to virtually any desired thickness for surfaces used in the medical, semi-conductor, electronic, and PWB industries where soft, high purity gold is required. C
athode efficiency 98%+  This solution should not be used for Jewelry.
Note: Due to the grain structure of this type of gold deposit the reflective qualities of the surface will become noticeably “matte” with increased thickness.
Electro-deposited gold will be equivalent to Type III, Grade A, specifications as indicated in MIL-DTL- 45204D, as follows;
One liter contains sufficient gold to cover ~ 800 square inches of area to a thickness of 10 micro-inches.
IMPORTANT NOTE:
This solution
requires
a
Platinum Plated Titanium Anode
.
What you will need to use this solution properly:
Our 24K Pure Gold Solution Bath requires the proper equipment and supplies to be used. We recommend electroplating equipment such as our
Jewel Master Option
5 which will have everything you need for most applications including the following minimum required items.
Minimum Required Items
A source of direct current voltage with a controllable voltage range of one to six volts, (1 VDC - 6 VDC).
A suitable container to hold the solution.
A
Platinum Anode
to apply the positive electrical charge to the solution.
A means to heat and keep the solution at 120° - 150° F. Agitation is also recommended for this solution.
A common lead or ground clip that will provide electrical connectivity from the negative (-) terminal of the power source and the item being plated.
A plating rack to hold the parts in the solution and provide electrical contact with the negative terminal of the power source.